1st Impression Lawns & Greens, synthetic grass, artificial turf, putting greens

The process begins by measuring the area and removing any existing grass along with approximately 4" of soil.
The area is then leveled and a layer of compactable base rock is added in. The base rock is then compacted in order to support the turf when it is applied.
After the base rock is set, a second layer of fine rock is added. The second layer is smoothed, sculpted, and compacted. After this step, the synthetic grass is ready to be installed.

The synthetic grass is then rolled out and set into place. The grass is trimmed and seamed as necessary to fit the area it is being installed.
If it is needed, divided sections are attached together to fit the varying shapes and sizes of the area being installed.
After the grass is installed, the installers go over the grass with a tufting machine which stands the blades of grass up to give it its natural look.
After the grass is tufted, infill is then added. Although the products we use do not require infill, we like to add a 1/4" of silica sand to add surface weight and structure to the grass. WE DO NOT USE ANY GROUND RUBBER PRODUCTS.
Once the infill is in, the grass is tufted a second time to help seat the infill. The area is then cleaned and tufted one last time to get the perfect ending result.

1st Impression Lawns & Greens, Serving the Bay Area